咨詢熱線:

0531-88771136

您的當前位置: 刮刮乐2000 > 新聞中心 > 正文

鋁合金壓鑄件損壞的處理措施

刮刮乐2000 www.yfrmbf.com.cn 來源:    發布時間:2019-06-26 15:37:05    點擊:

  鋁合金壓鑄工藝一般可分為:噴漆、粉末噴涂和電泳。工件表面處理后,根據不同工件外觀和耐腐蝕要求,選擇合適的噴涂工藝和設備,同時應注意調平、干燥、冷卻等工藝控制,否則會對產品質量產生不良影響。雖然我們很小心,有時鋁合金壓鑄件會損壞,我們應該如何處理呢?
  Aluminum alloy die casting process can be generally divided into: spraying, powder spraying and electrophoresis. After surface treatment of workpiece, according to different workpiece appearance and corrosion resistance requirements, appropriate spraying process and equipment should be selected. At the same time, attention should be paid to leveling, drying, cooling and other process control, otherwise the product quality will be adversely affected. Although we are very careful, sometimes the aluminium alloy die castings will be damaged, how should we deal with it?
  山東鋁合金壓鑄
  Die Casting of Aluminum Alloy in Shandong Province
  1. 開?;蛐薇吆?,零件與模具、設備或工作臺的邊角接觸;
  1. After opening or trimming, the parts contact with the edges and corners of the die, equipment or worktable.
  2. 各工序鋁合金壓鑄件堆放不當;
  2. improper stacking of aluminium alloy die castings in each process;
  3.操作人員在各個操作過程中操作不當,如投擲零件;
  3. Operators operate improperly in various operation processes, such as throwing parts;
  4. 過程間的轉移,如隔離?;?、倒塌等;
  4. Transfer between processes, such as isolation and protection, collapse, etc.
  5. 在每道工序中敲打作業工具,如壓鑄鉤、夾具、銼刀、沖床等在清洗工序中。
  5. Knock tools in each process, such as die-casting hook, fixture, file, punch, etc. in the cleaning process.
  6. 拾起零件時,不要與零件碰撞;
  6. Do not collide with parts when picking up parts.
  7. 按照作業指導書的要求,不得堆放,必須整齊地逐一放入工作用具內;
山東鋁合金壓鑄
  7. According to the requirements of the operation instruction, it is not allowed to stack, but must be put into the working tools one by one neatly.
  8、不允許拋件,輕拿輕放,如鋁合金壓鑄件必須慢慢滑下臺面,不允許相互碰撞;
  8. No throwing, light handling, such as aluminium alloy die castings must slide down the table slowly and collision with each other is not allowed.
  9. 工作設備內的鋁合金壓鑄件必須進行?;ず透衾?,轉移速度要慢,防止壓鑄件倒塌或掉落;
  9. Aluminum alloy die castings in working equipment must be protected and isolated. The transfer speed should be slow to prevent the collapse or fall of the die castings.
  10、正確使用操作工具,防止碰撞。鋁合金壓鑄件不得鉤住或夾持鑄件本體。清洗文件和沖頭必須準確地在要清洗的地方操作。
  10. Correct use of operating tools to prevent collision. Aluminum alloy die castings shall not hook or clamp the casting body. Cleaning documents and punches must be operated accurately where they are to be cleaned.
  11. 鋁合金壓鑄件存放時,應置于通風干燥的環境中;
  11. Aluminum alloy die castings should be stored in a ventilated and dry environment.
  12、避免鋁合金壓鑄件與其他化學元素接觸,接觸其他化學元素,會引起鋁合金壓鑄件其它變化;
  12. Avoiding contact with other chemical elements and other chemical elements will lead to other changes of aluminum alloy die castings.
  13. 鋁是一種活性金屬,在一定的溫度下容易被氧化。平時放置鋁合金壓鑄件時,應避免陽光直射;
  13. Aluminum is a kind of active metal, which is easy to be oxidized at a certain temperature. When placing aluminium alloy die castings in normal time, direct sunlight should be avoided.
  14、比較好能將鋁合金壓鑄件放置在特定的位置,能保證鋁合金壓鑄件完好無損,不會發生任何其他變化;
  14. It is better to place the aluminum alloy die castings in a specific position to ensure that the aluminum alloy die castings are intact and intact without any other changes.
  15、放置鋁合金壓鑄件時,不要讓壓鑄件與水接觸,接觸水后,容易使鋁合金壓鑄件發黑。
  15. When placing aluminium alloy die castings, do not let the die castings contact with water. After contact with water, it is easy to blacken the aluminium alloy die castings.
  一般來說,只有使鋁合金壓鑄件不受損傷,才能使其具有更好的光澤、色澤和耐候性。以上是山東鋁合金壓鑄廠家為大家整理的相關內容,希望能幫到大家,我們的網站是//www.yfrmbf.com.cn,歡迎大家來電咨詢。
  Generally speaking, only if the aluminium alloy die castings are not damaged, can they have better gloss, color and weatherability. The above is the related content of Shandong Aluminum Alloy Die Casting Factory for you. I hope to help you. Our website is //www.yfrmbf.com.cn. Welcome to inquire.
聯系我們 contact

山東濟南模具_鋁合金壓鑄-濟南宏捷模具有限公司

電話1:13173017488

電話2:18615459955

傳真:0531-88771136

郵箱:[email protected]

地址:山東省濟南市大橋鎮大王村北跨商務中心后三層白樓

山東濟南模具_鋁合金壓鑄-濟南宏捷模具有限公司 手機: 13173017488 咨詢熱線: 0531-88771136 咨詢熱線:18615459955 郵箱:[email protected]

公司地址: 山東省濟南市大橋鎮大王村北跨商務中心后三層白樓 備案號:魯ICP備19048961號-1

版權所有 Copyright ? 2016-2018 山東濟南模具_鋁合金壓鑄-濟南宏捷模具有限公司 網站建設:濟南諾商 流量統計:
網站地圖刮刮乐2000TXT