咨詢熱線:

0531-88771136

您的當前位置: 刮刮乐2000 > 新聞中心 > 正文

山東鋁合金壓鑄件出現裂紋不會處理?

刮刮乐2000 www.yfrmbf.com.cn 來源:    發布時間:2019-06-15 14:28:02    點擊:

  山東鋁合金壓鑄件裂紋該怎樣處理呢?下面小編來為您淺談;
  How to deal with the cracks in Shandong aluminium alloy die castings? The following is a brief introduction for you.
  一、可能的緣由剖析
  I. Analysis of Possible Reasons
  鋁合金壓鑄件呈現裂紋的緣由有很多,其中有冷裂,熱裂,材料緣由等原因都是這些因素。剖析結果,這次的產品設計中,呈現了一些薄壁的地方,裂紋常常呈現在這個位置。并且還發現了運輸過程中的粗暴舉動,磕磕碰碰也不少,也形成很多的裂紋。
  There are many reasons for cracks in aluminium alloy die castings, including cold cracks, hot cracks, material reasons and so on. The analysis results show that in this product design, there are some thin-walled areas where cracks often appear. And also found in the transport process of rough behavior, bumps and collisions are many, but also formed many cracks.
  二、壓鑄工藝上的改良措施
山東鋁合金壓鑄
  II. Improvement Measures in Die Casting Technology
  鋁合金壓鑄裂紋缺陷高,是由多種因素造成的,因此有必要同時采取措施。在模具上,薄壁位置加筋。也有關于在運輸途中發生暴行的報告。
  The high crack defect of aluminium alloy in die casting is caused by many factors, so it is necessary to take measures at the same time. On the die, the thin wall position is reinforced. There are also reports of atrocities in transit.
  第三,改善效果
  Third, improve the effect
  改進后,裂紋缺陷的萌生性得到改善。
  After improvement, the initiation of crack defects is improved.
  以上是刮刮乐2000裂紋的處理方法,希望本文能為您帶來幫助。我們的網站是//www.yfrmbf.com.cn
  The above is the treatment method of Shandong aluminium alloy die casting cracks, I hope this article can help you. Our website is //www.yfrmbf.com.cn.
聯系我們 contact

山東濟南模具_鋁合金壓鑄-濟南宏捷模具有限公司

電話1:13173017488

電話2:18615459955

傳真:0531-88771136

郵箱:[email protected]

地址:山東省濟南市大橋鎮大王村北跨商務中心后三層白樓

山東濟南模具_鋁合金壓鑄-濟南宏捷模具有限公司 手機: 13173017488 咨詢熱線: 0531-88771136 咨詢熱線:18615459955 郵箱:[email protected]

公司地址: 山東省濟南市大橋鎮大王村北跨商務中心后三層白樓 備案號:魯ICP備19048961號-1

版權所有 Copyright ? 2016-2018 山東濟南模具_鋁合金壓鑄-濟南宏捷模具有限公司 網站建設:濟南諾商 流量統計:
網站地圖刮刮乐2000TXT