咨詢熱線:

0531-88771136

您的當前位置: 刮刮乐2000 > 新聞中心 > 正文

濟南模具判斷注塑模具質量的四個標準

刮刮乐2000 www.yfrmbf.com.cn 來源:    發布時間:2019-05-27 18:25:12    點擊:

  濟南模具判斷注塑模具質量的四個標準,注塑模具屬于一種塑料制品的生產工具,通過成型復雜形狀的加工方法來大規模生產產品,注塑過程中生產、注塑模具的質量是決定然后產品的質量,特別是對于一些精度類電子產品注塑模具的要求特別高,當我們選擇注塑模具需要全面衡量,那么如何判斷注塑模具的質量呢?
  Jinan Mold is one of the four standards for judging the quality of injection moulds. Injection moulds belong to a kind of production tool of plastic products. The large-scale production of products is achieved through the processing method of forming complex shapes. The quality of production and injection moulds in the process of injection moulding determines the quality of final products. Especially for some precision electronic products, the requirement of injection moulds is very high. When we choose injection moulds, we need to use them. To measure comprehensively, how to judge the quality of injection moulds?
  注塑模具質量檢測4項標準
  Four Standards for Quality Inspection of Injection Mold首先在注塑產品的過程中,通常在注塑模具溫度較高,所以工廠注塑模具制造注塑模具必須接受高溫回火鋼鋼,所以即使在高溫的環境整體設計好模具尺寸將不受影響,以保證模具的精度。
                        濟南模具
  Firstly, in the process of injection products, the temperature of injection mold is usually higher, so the injection mold in factory must accept high temperature tempered steel, so even in the high temperature environment, the overall design of the mold size will not be affected, in order to ensure the accuracy of the mold.
  其次,在注塑生產過程中,樹脂等塑料制品的原材料和各種添加劑會對注塑模具表面形成腐蝕,從而影響整個注塑模具的精度。
  Secondly, in the process of injection moulding, raw materials and additives of plastic products such as resins will corrode the surface of injection moulds, thus affecting the accuracy of the whole injection moulds.
  塑料制品表面光澤一般有很高的要求,因此在注塑生產過程中需要相應的注塑模具腔表面粗糙度很小,以符合標準的塑料制品、注塑加工必須選擇不含雜質和模具鋼的孔隙度,制造注塑模具后還必須在模具型腔的表面拋光、磨等加工。
  The surface gloss of plastic products generally has high requirements, so the surface roughness of injection mould cavity is very small in the process of injection moulding production. In order to meet the standards of plastic products and injection moulding processing, the porosity of mould steel must be selected without impurities. After manufacturing the injection moulds, the surface polishing and grinding of the mould cavity must also be processed.
  濟南模具判斷注塑模具質量的四個標準,在使用的過程中注塑模具來生產塑料制品,由于塑料原材料的高速流動的模具型腔注塑模具,整個模具的表面會形成很多摩擦,因此有必要選擇耐磨模具鋼,以確保產品的質量質量注塑過程中始終保持穩定。
  There are four criteria for judging the quality of injection mold in Jinan. In the process of using injection mold to produce plastic products, because of the high-speed flow of plastic raw materials in the injection mold cavity, there will be a lot of friction on the surface of the whole mold. Therefore, it is necessary to select wear-resistant die steel to ensure the quality of products to maintain stability throughout the injection process.
 
聯系我們 contact

山東濟南模具_鋁合金壓鑄-濟南宏捷模具有限公司

電話1:13173017488

電話2:18615459955

傳真:0531-88771136

郵箱:[email protected]

地址:山東省濟南市大橋鎮大王村北跨商務中心后三層白樓

山東濟南模具_鋁合金壓鑄-濟南宏捷模具有限公司 手機: 13173017488 咨詢熱線: 0531-88771136 咨詢熱線:18615459955 郵箱:[email protected]

公司地址: 山東省濟南市大橋鎮大王村北跨商務中心后三層白樓 備案號:魯ICP備19048961號-1

版權所有 Copyright ? 2016-2018 山東濟南模具_鋁合金壓鑄-濟南宏捷模具有限公司 網站建設:濟南諾商 流量統計:
網站地圖刮刮乐2000TXT