咨詢熱線:

0531-88771136

您的當前位置: 刮刮乐2000 > 新聞中心 > 正文

塑料模具制品表面涂裝的優點

刮刮乐2000 www.yfrmbf.com.cn 來源:    發布時間:2019-05-08 11:58:05    點擊:

  今天,一位顧客問我塑料制品的表面是否需要油漆,對此我也很無奈。因為這個問題仍然取決于客戶的要求。
  Today, a customer asked me if I needed paint on the surface of plastic products, and I had no choice about it. Because the problem still depends on the customer's requirements.
  塑料制品表面噴漆可以保證產品的亮度。因為塑料產品本身很難反光。因此,塑料零件看起來更暗。如果塑料零件表面的皮革線被加上,它會變得更暗。因此,一些客戶會在塑料零件表面噴涂一層油漆,以追求美麗的表面。這確保了產品的亮度。
  Spray paint on the surface of plastic products can ensure the brightness of products. Because plastic products themselves are difficult to reflect light. As a result, plastic parts look darker. If the leather thread on the surface of plastic parts is added, it will become darker. Therefore, some customers will spray a layer of paint on the surface of plastic parts in order to pursue a beautiful surface. This ensures the brightness of the product.
  塑料制品表面涂裝可以降低塑料制品的廢品率。白色塑料制品的廢品率一直是注塑行業的頭痛問題。如果表面涂漆,產品的缺陷將被掩蓋,產品的廢品率將降低。
                               山東模具
  Surface coating of plastic products can reduce the waste rate of plastic products. The waste rate of white plastic products has always been a headache in the injection industry. If the surface is painted, the defects of the product will be covered up and the rejection rate of the product will be reduced.
  因此,在有要求的塑料零件表面噴漆非常有用。然而,噴漆時還有另一個注射成型過程。成本會增加。
  Therefore, it is very useful to spray paint on the surface of required plastic parts. However, there is another injection molding process when spraying paint. Costs will increase.
  這是兩者的優點和缺點。
  This is the advantage and disadvantage of both.
 
聯系我們 contact

山東濟南模具_鋁合金壓鑄-濟南宏捷模具有限公司

電話1:13173017488

電話2:18615459955

傳真:0531-88771136

郵箱:[email protected]

地址:山東省濟南市大橋鎮大王村北跨商務中心后三層白樓

山東濟南模具_鋁合金壓鑄-濟南宏捷模具有限公司 手機: 13173017488 咨詢熱線: 0531-88771136 咨詢熱線:18615459955 郵箱:[email protected]

公司地址: 山東省濟南市大橋鎮大王村北跨商務中心后三層白樓 備案號:魯ICP備19048961號-1

版權所有 Copyright ? 2016-2018 山東濟南模具_鋁合金壓鑄-濟南宏捷模具有限公司 網站建設:濟南諾商 流量統計:
網站地圖刮刮乐2000TXT