咨詢熱線:

0531-88771136

您的當前位置: 刮刮乐2000 > 新聞中心 > 正文

山東模具日常維護流程都有哪些及重要性?

刮刮乐2000 www.yfrmbf.com.cn 來源:    發布時間:2019-11-27 15:57:36    點擊:

任何東西都離不開日常維護,大家也都知道日常維護有多重要,山東模具也是需要維護的,那么現在就由濟南市宏捷模具有限公司帶大家里了解一下如何完善的做好模具的維護工作?
  Everything is inseparable from the daily maintenance. We all know how important the daily maintenance is. Shandong mold also needs to be maintained. Now, Jinan Hongjie Mold Co., Ltd. will take you to understand how to complete the mold maintenance work?
  日常負責模具保養工作的保養者必須慎重、細心地作業,切實保證模具的狀態,已期做到在生產時有效、經濟,盡可能的降低制造成本。
  The maintainer who is responsible for the daily maintenance of the mould must work carefully and carefully to ensure the best condition of the mould, which is expected to be effective and economical in production and reduce the manufacturing cost as much as possible.
  首先,保養須知:注塑模具保養時,需要按照圖紙檢查部件。即使沒有特別指示的東西,也要在入庫時進行檢查;不得擅自修改不符合圖紙規定的模具零部件尺寸,也不能用墊塊或墊片進行追加插入等等;生產訂單完成后的模具保養,必須參照生產部門提供的問題點、生產部門記錄以及更終產品進行;在模具保養中,如發現重大問題,應立即向上級主管報告,并等待指示。
  First of all, maintenance instructions: when maintaining the injection mold, it is necessary to check the parts according to the drawings. Even if there is no special instruction, it shall be inspected when it is put into storage; it is not allowed to modify the dimensions of mold parts that do not meet the requirements of the drawings without authorization, or add inserts with cushion blocks or gaskets, etc.; the mold maintenance after the completion of the production order must refer to the problem points provided by the production department, the records of the production department and the final products; during the mold maintenance, if it is found that Major problems shall be reported to the superior immediately and wait for instructions.
山東模具
  其次,有關注塑模具保養的具體要求:在更換模具部件時,確認將更換的部件品質合格;各部件拆卸、裝配要輕敲、緩壓;模具鑲件裝配時,確認配合間隙合格;避免部件表面無卷翹、劃傷、凹點、糟粕、缺損、鐵銹等情況;如有部件更換,及時與模具設計部門溝通和確認,拆卸模具前后時,注意保持各個部件拽拉平衡;如有需要更換的部件,必須及時更換。
  Secondly, the specific requirements for the maintenance of injection mold: when replacing the mold parts, confirm that the quality of the parts to be replaced is qualified; when disassembling and assembling the parts, tap and slow press; when assembling the mold inserts, confirm that the fit clearance is qualified; avoid no curling, scratch, pit, dross, defect, rust, etc. on the surface of the parts; if there are parts to be replaced, timely communicate with the mold design department General and confirmation: before and after disassembling the mold, pay attention to keep the pulling balance of each part; if there are parts that need to be replaced, they must be replaced in time.
  ,注塑模具日常的維護必須慎重、細心地進行,以確保模具時刻保持在狀態。
  Finally, the daily maintenance of injection mold must be carried out carefully to ensure that the mold is always in the best condition.
  以上就是由濟南市宏捷模具有限公司帶大家里了解一下如何完善的做好模具的維護工作的介紹,希望可以幫到你,想要了解更多請點擊官網刮刮乐2000
  The above is the introduction of Jinan Hongjie mould Co., Ltd. to learn how to improve the maintenance of mould. I hope it can help you. For more information, please click //www.yfrmbf.com.cn
聯系我們 contact

山東濟南模具_鋁合金壓鑄-濟南宏捷模具有限公司

電話1:13173017488

電話2:18615459955

傳真:0531-88771136

郵箱:[email protected]

地址:山東省濟南市大橋鎮大王村北跨商務中心后三層白樓

山東濟南模具_鋁合金壓鑄-濟南宏捷模具有限公司 手機: 13173017488 咨詢熱線: 0531-88771136 咨詢熱線:18615459955 郵箱:[email protected]

公司地址: 山東省濟南市大橋鎮大王村北跨商務中心后三層白樓 備案號:魯ICP備19048961號-1

版權所有 Copyright ? 2016-2018 山東濟南模具_鋁合金壓鑄-濟南宏捷模具有限公司 網站建設:濟南諾商 流量統計:
網站地圖刮刮乐2000TXT