咨詢熱線:

0531-88771136

您的當前位置: 刮刮乐2000 > 新聞中心 > 正文

濟南模具加工廠家是怎樣清潔模具的?

刮刮乐2000 www.yfrmbf.com.cn 來源:    發布時間:2019-10-24 16:17:11    點擊:

  濟南模具加工廠家是怎樣清潔模具的?
  How does Jinan mold processing factory clean the mold?
  1、運用前的清潔
  1. Cleaning before use
  模具是出產注塑產品的重要工具,要將原資料注入到模具傍邊讓其成型,假設模具里邊有異物或有油污就會招致產品的質量欠安。所以,為了能夠保證注塑產質量量令人稱心,注塑加工廠在運用模具之前就要對其停止出色的清潔,要先將模具外表的油污和鐵銹清潔干凈,還要疏浚冷卻水孔,避免水路不通。
  Mold is an important tool to produce injection molding products. If there is foreign matter or oil in the mold, the quality of the products will be poor. Therefore, in order to ensure the satisfactory quality of the injection molding production, the injection molding plant should stop the excellent cleaning of the mold before using it, first clean the oil and rust on the surface of the mold, and dredge the cooling water holes to avoid water blockage.
  2、運用過程中的清潔
  2. Cleaning during application
濟南模具
  在模具的運用過程中注塑加工廠也要對其停止清潔,主要是清潔模具分型面和排氣槽傍邊的異物和膠絲、油物,此外,還要將分模面和流道面每天打掃兩次,以保證模具的清潔性,避免由于運用過程中的異物附在模具傍邊招致加工產品的質量遭到影響。
  In the application process of the mold, the injection molding plant should also stop cleaning the mold, mainly cleaning the foreign matters, rubber wire and oil near the mold parting surface and exhaust groove. In addition, the parting surface and flow channel surface should be cleaned twice a day to ensure the cleanness of the mold and avoid the impact on the quality of the processed products caused by the foreign matters attached to the mold during the application process.
  3、?;蟮那褰?/div>
  3. Cleaning after shutdown
  當一個批次的產品加工結束之后注塑加工廠還需求將模具清潔干凈,避免有出產時的殘留物存在于其中。因此,在?;笠笆苯>咧脅辛艫乃頰碭刪?,避免有膠絲和異物殘留在模具傍邊,而且還要在整理干凈以后往模具里邊噴上防銹劑,避免在保管模具的時分生銹。
  After a batch of products are processed, the injection molding plant also needs to clean the mold to avoid the residues in the production. Therefore, after the machine is shut down, the remaining water in the mold shall be cleaned in time to avoid the glue wire and foreign matters remaining on the side of the mold, and the rust inhibitor shall be sprayed on the mold after the cleaning to avoid the rust when the mold is kept.
  以上是刮刮乐2000加工廠家為大家介紹的相關內容,想要了解更多內容,歡迎訪問網站://www.yfrmbf.com.cnThe above is the relevant content introduced by Jinan mold processing factory for you. To learn more, please visit the website: //www.yfrmbf.com.cn
聯系我們 contact

山東濟南模具_鋁合金壓鑄-濟南宏捷模具有限公司

電話1:13173017488

電話2:18615459955

傳真:0531-88771136

郵箱:[email protected]

地址:山東省濟南市大橋鎮大王村北跨商務中心后三層白樓

山東濟南模具_鋁合金壓鑄-濟南宏捷模具有限公司 手機: 13173017488 咨詢熱線: 0531-88771136 咨詢熱線:18615459955 郵箱:[email protected]

公司地址: 山東省濟南市大橋鎮大王村北跨商務中心后三層白樓 備案號:魯ICP備19048961號-1

版權所有 Copyright ? 2016-2018 山東濟南模具_鋁合金壓鑄-濟南宏捷模具有限公司 網站建設:濟南諾商 流量統計:
網站地圖刮刮乐2000TXT