咨詢熱線:

0531-88771136

您的當前位置: 刮刮乐2000 > 新聞中心 > 正文

鋁合金壓鑄件在操作時被損傷該怎么處理?

刮刮乐2000 www.yfrmbf.com.cn 來源:    發布時間:2019-10-21 11:11:45    點擊:

  鋁合金壓鑄工藝一般可分為:噴漆,除塵和電泳。 對工件進行表面處理后,針對不同工件的外觀和耐蝕性要求選擇合適的噴涂工藝和設備,并注意流平,干燥和冷卻的控制,否則會影響產品質量。 盡管我們非常小心,但有時鋁合金壓鑄件會受傷。 我們應該做什么?
  Aluminum alloy die casting process can be generally divided into: painting, dust removal and electrophoresis. After the surface treatment of the workpiece, the appropriate spraying process and equipment shall be selected according to the appearance and corrosion resistance requirements of different workpieces, and the control of leveling, drying and cooling shall be paid attention to, otherwise the product quality will be affected. Although we are very careful, sometimes aluminum die castings can get hurt. What should we do?
山東鋁合金壓鑄
  1.取?;蛉”吆?,工件被模,設備或工作臺的邊或角碰到;
  1. After taking the mold or edge, the workpiece is touched by the edge or angle of the mold, equipment or workbench;
  2.在各個操作步驟中鋁合金壓鑄件的堆放不當;
  2. Improper stacking of aluminum alloy die castings in each operation step;
  3.各個操作程序的操作者未正確操作,例如扔掉碎片;
  3. Operators of various operation procedures do not operate correctly, such as throwing away debris;
  4.流程之間的轉移,如果沒有分開,?;?,崩潰等;
  4. Transfer between processes, if not separated, protected, collapsed, etc.
  5.每個操作過程中的操作工具的凸塊,例如壓鑄拾取鉤,拾取鉗等,清潔過程中的鏜孔工具和沖頭。
  5. Boss of operation tools in each operation process, such as die casting pick-up hook, pick-up pliers, etc., boring tools and punches in cleaning process.
  6,提貨時要注意,不要碰碰;
  6. Pay attention not to touch when picking up the goods;
  7.根據操作說明的要求,不允許堆放,必須整齊地放置在站內設備中;
  7. According to the requirements of the operation instructions, it is not allowed to stack, and it must be placed neatly in the equipment in the station;
  8,不允許丟件,輕拿輕放,如鋁合金壓鑄件必須從工作臺上慢慢滑出,不允許互相碰撞;
  8. It is not allowed to lose parts and handle them with care. For example, aluminum alloy die-casting parts must slide out of the workbench slowly, and collision with each other is not allowed;
  9.站內設備的鋁合金壓鑄件必須加以?;ず透衾?,運輸應緩慢,以防止鑄件倒塌或掉落;
  9. The aluminum alloy die castings of the equipment in the station must be protected and isolated, and the transportation shall be slow to prevent the castings from collapsing or falling;
  10.正確使用操作工具以防止碰撞。 不允許鋁合金壓鑄件撿起或拿走鑄件。 必須在要清潔的區域內準確清潔銼刀和打孔器。
  10. Use the operating tools correctly to prevent collision. Aluminum die castings are not allowed to pick up or remove castings. Files and punches must be cleaned accurately in the area to be cleaned.
  11.存放鋁合金壓鑄件時,應將其放置在通風干燥的環境中;
  11. When storing aluminum alloy die castings, they shall be placed in a ventilated and dry environment;
  12.避免鋁合金壓鑄件與其他化學元素接觸。 與其他化學元素接觸后,鋁合金壓鑄件將發生其他變化。
  12. Avoid contact of aluminum alloy die casting with other chemical elements. After contacting with other chemical elements, other changes will take place in aluminum alloy die casting.
  13.由于鋁是一種活性金屬,因此在接觸一定溫度后很容易被氧化。 放置鋁合金壓鑄件時,應避免陽光直射;
  13. Because aluminum is an active metal, it is easy to be oxidized after contact with a certain temperature. When placing aluminum alloy die castings, avoid direct sunlight;
  14.好將鋁合金壓鑄件放置在特定的位置,以確保鋁合金壓鑄件完好無損,并且不會發生其他變化;
  14. It is better to place the aluminum alloy die-casting in a specific position to ensure that the aluminum alloy die-casting is intact without any other changes;
  15.放置鋁合金壓鑄件時,請勿使壓鑄件與水接觸。 與水接觸后,很容易使鋁合金壓鑄件發黑。
  15. When placing the aluminum alloy die casting, do not make the die casting contact with water. After contacting with water, it is easy to blacken the aluminum alloy die casting.
  通常情況下,只有不刮傷鋁合金壓鑄件時,它們才具有更好的光澤,顏色和耐候性。
  In general, only when the aluminum alloy die castings are not scratched can they have better luster, color and weather resistance.
  本文由刮刮乐2000<//www.yfrmbf.com.cn/>友情奉獻.更多有關的知識請點擊:<//www.yfrmbf.com.cn/>,我們將用先進的技術,真誠的態度,為您提供為全面的服務。更多有關的知識我們將會陸續向大家奉獻,敬請期待!
  This paper is dedicated by Shandong Aluminum Alloy Die Casting Factory < //www.yfrmbf.com.cn/ /. For more information, please click < //www.yfrmbf.com.cn/ > and we will provide you with comprehensive services with advanced technology and sincere attitude. We will continue to dedicate more knowledge to you, please look forward to!
聯系我們 contact

山東濟南模具_鋁合金壓鑄-濟南宏捷模具有限公司

電話1:13173017488

電話2:18615459955

傳真:0531-88771136

郵箱:[email protected]

地址:山東省濟南市大橋鎮大王村北跨商務中心后三層白樓

山東濟南模具_鋁合金壓鑄-濟南宏捷模具有限公司 手機: 13173017488 咨詢熱線: 0531-88771136 咨詢熱線:18615459955 郵箱:[email protected]

公司地址: 山東省濟南市大橋鎮大王村北跨商務中心后三層白樓 備案號:魯ICP備19048961號-1

版權所有 Copyright ? 2016-2018 山東濟南模具_鋁合金壓鑄-濟南宏捷模具有限公司 網站建設:濟南諾商 流量統計:
網站地圖刮刮乐2000TXT